Safety in High-rise Building Construction

23 Mar 2015 13 Dec 2017

11 (4,074 )

Chapter 1: Introduction 1.1 Background In previous decades since workers balanced themselves at dizzying heights above ground with little to prevent them from falling, high-rise construction has been layered in safety regulations and equipment. Construction can be referred as a relatively hazardous undertaking. There are significantly more injuries and lost workdays due to injuries or illnesses in construction as compared to any other industry. In contrast to ...

Click here to read more arrow

Simple Robots and Microprocessors

23 Mar 2015 13 Dec 2017

8 (3,009 )

I. Introduction A robot is a virtual or mechanical artificial agent. In practice, it is usually an electro-mechanical machine which is guided by computer or electronic programming, and is thus able to do tasks on its own. Another common characteristic is that by its appearance or movements, a robot often conveys a sense that it has intent or agency of its own. While A microprocessor incorporates most ...

Click here to read more arrow

Application of Pinch Technology and Analysis

23 Mar 2015 13 Dec 2017

6 (2,164 )

INTRODUCTION: The term "Pinch Technology" was introduced by Linnhoff and Vredeveld to represent a new set of thermodynamically based methods that guarantee optimum energy requirements in design of heat exchanger networks. The application of Pinch technology to study industrial process is called Pinch Analysis. Applying first and second Laws of thermodynamics is essential in Pinch Analysis method. The first law of thermodynamics enables us to use the ...

Click here to read more arrow

Design of Handshake Mode

23 Mar 2015 13 Dec 2017

11 (4,083 )

Design Of Handshake Mode 8255A Using 8086 Introduction: 8255 is a widely used general purpose programmable devices, can be compatible with any microprocessor. The 8255 includes three programmable ports, one of which can be used for bidirectional data transfer. This is an important additional feature in comparison with the 8155 I/O ports. The 8255 has 24 I/0 pins that can be grouped primarily in two 8 bit ...

Click here to read more arrow

The Taguchi Methods for Quality Improvement

23 Mar 2015 13 Dec 2017

10 (3,876 )

INTRODUCTION: Taguchi methods are statistical methods developed by Genichi Taguchi to improve the quality of manufactured goods, and more recently also applied to, engineering, biotechnology, marketing and advertising. Professional statisticians have welcomed the goals and improvements brought about by Taguchi methods, particularly by Taguchi's development of designs for studying variation, but have criticized the inefficiency of some of Taguchi's proposals. Taguchi's work includes three principal contributions to ...

Click here to read more arrow

Benefits of Quality Control

23 Mar 2015 13 Dec 2017

5 (1,947 )

THE QUALITY CONTROL ERA The inspection-based approach to quality was challenged by Walter A. Shewhart. Shewhart's landmark 1931 book Economic Control of Quality of Manufacturing introduced the modern era of quality management. In 1924, Shewhart was part of a group working at Western Electric's Inspection Engineering Department of Bell Laboratories. Other members of the group included Harold Dodge, Harry Romig, G.D. Edwards, and Joseph Juran, a veritable ...

Click here to read more arrow

Nanyang Optical Company Strategy

23 Mar 2015 13 Dec 2017

9 (3,480 )

Overview Nanyang Optical is a well established company in Singapore, with more than 30 years of experience in retail, wholesale and manufacturing in the eyewear industry. They are one of Singapore's largest optical retail chains with more than 20 outlets operating in Singapore, Indonesia and China. The reason why Nanyang Optical is able to get to where it is today is because of the product design and ...

Click here to read more arrow

Arc Welding Concept and Process

23 Mar 2015 13 Dec 2017

8 (3,005 )

Arc welding is a process of the fusion welding processes which contains:- 1 - Arc - welding processes (non consumable electrodes) Gas tungsten - arc welding Plasma - arc welding Atomic - hydrogen welding 2 - Arc - welding processes (consumable electrodes) Shielded metal arc welding Submerged - arc welding Gas metal arc welding Flux cored arc welding Electro gas welding Electro slag welding 3 - Electron ...

Click here to read more arrow

Advantages of RTL, DTL and TTL Logic circuit

23 Mar 2015 13 Dec 2017

6 (2,376 )

Introduction of Logic Gates A logic gate performs a logical operation on one or more logic inputs and produces a single logic output. The logic normally performed is Boolean logic and is most commonly found in digital circuits. Logic gates are primarily implemented electronically using diodes or transistors, but can also be constructed using electromagnetic relays, fluidics, optics, molecules, or even mechanical elements. In electronic logic, a ...

Click here to read more arrow

Electromagnetic Suspension Prototype Design

24 Feb 2017 13 Dec 2017

20 (7,798 )

ABSTRACT Electromagnetic suspension works where two or more electromagnets of the same polarity absorb all the bumps. The main problem is making the magnets strong enough when running off a cars electrical system. This work describes techniques for the design & analysis of a prototype magnetic suspension system. The viability of future high temperature super conducting magnet designs for MAGLEV has been investigated with regard to their ...

Click here to read more arrow

Overview of and Applications of Choke Coils

23 Mar 2015 13 Dec 2017

7 (2,635 )

INTRODUCTION http://upload.wikimedia.org/wikipedia/commons/thumb/4/43/Choke_electronic_component_Epcos_2x47mH_600mA_common_mode.jpg/180px-Choke_electronic_component_Epcos_2x47mH_600mA_common_mode.jpg A choke is an inductor designed to block (have a high reactance to) a particular frequency in an electrical circuit while passing signals of much lower frequency ordirect current. Description Choke coils are inductances that isolate AC frequency currents from certain areas of a radio circuit. Chokes depend upon the property of self-inductance for their operation. They can be used to block alternating current while ...

Click here to read more arrow

Maintenance and Operation of Lubricant Systems

23 Mar 2015 13 Dec 2017

18 (6,894 )

Activity 1 Explain the purpose and the applications of three different types of lubricant. Greases: are solid or semisolid lubricants and generally consist of soaps, mineral oil, and various additives. These are highly viscous ad adhere well to metal surfaces. Although used extensively in machinery, greases are of limited use in manufacturing processes. Graphite: is weak in shear alone its basal planes and therefore has a ...

Click here to read more arrow

Gulmay D3300 X-ray Therapy Machine System

29 Nov 2017

6 (2,234 )

Gulmay D3300 x-ray therapy machine system from Gulmay Medical Ltd. Introduction ­­­­­­­­­­­­­­­Kilovoltage unit was one of the first external beam therapy used in a radiotherapy department. Despite its popularity then, departments opt into using a megavoltage machine due to its versatility in treatment. The uses kilovoltage therapy, especially superficial x-ray therapy remains widely important in treating certain cancer patients. Gulmay Medical Ltd is one of the ...

Click here to read more arrow

Developing a Compensator using Cerrobend Materials

27 Nov 2017

8 (2,839 )

ABSTRACT In external beam radiotherapy (EBRT), dose optimization is achieved by conforming the dose distribution to the shape of the intended target whilst minimizing radiation to normal tissues in close proximity to the target. This is achieved by modulating the intensities of the radiation across the radiation portals forming the irradiation geometry used for the treatment. Compensators may be used to achieve the above effect and ...

Click here to read more arrow

Gain Enhancement of Multiband Microstrip Radiating Structure

24 Nov 2017

10 (3,883 )

Gain Enhancement of Multiband Microstrip Radiating Structure using Curve Tooth CSRR with Two Different Substrate Material Muktesh P. Shah1, Shobhit K. Patel2, Mayank A. Ardeshana3, Jigar M. Patel4 Abstract—In this paper Microstrip radiating structure with Complementary Split Ring Resonator (CSRR) using Curve Tooth with two different substrate material for Multiband applications in S band and C band is designed and analyzed. We have introduced ...

Click here to read more arrow

Prototype of 3D Cadaster Polygonal Model

23 Nov 2017

8 (3,144 )

Abhijit Gujar   Table of Contents 1.Introduction 1.1.Background and Justification 1.2.Literature review 1.2.1.Review on concept though and ideas 1.2.2.Review on approaches 1.3.Research problem 1.4.Research objective 1.4.1.General objective 1.4.2.Specific objective 1.5.Research questions 1.6.Research limitations 2.Research design and methods 2.1.Study area 2.2.Data 2.3.Software and hardware requirement 2.4.Research design matrix 3.Framework 3.1.Research framework 3.2.Thesis framework 3.3.Work plan framework 4.Reference 1. Introduction 1.1. Background and Justification Urbanization is ...

Click here to read more arrow

Constrained Relative Motion Between Two Or More Parts

02 Nov 2017

3 (3 )

3.2 Types of bearing A bearing is a device used to allow constrained relative motion between two or more parts, typically rotational or linear movement. Bearings are used to support rotating shafts. There are different types, used for different applications and can be classified according to their motions, operating principles, load capacity, speed and the size ...

Click here to read more arrow

Homer Micropower System Modellings

02 Nov 2017

1 (1 )

The objective of this thesis is to assess the feasibility of different Hybrid-renewable systems configurations, which can be modeled on houses in different regions of the country. The systems are assessed in terms economical and technical aspects. The different system models were designed and simulated with HOMER legacy energy software, also known ...

Click here to read more arrow

Engine Performance And Exhaust

02 Nov 2017

1 (1 )

CHAPTER 2 Hakan Bayraktar observed the effects of ethanol addition to gasoline on an SI engine performance and exhaust emissions, experimentally and theoretically. Experimental applications have been carried out with the blends containing 1.5, 3, 4.5, 6, 7.5, 9, 10.5 and 12 vol% ethanol. Results obtained from both theoretical and experimental studies are compared graphically. ...

Click here to read more arrow

Address Randomization And Stack Smash Protection

02 Nov 2017

7 (7 )

This attack is where we smash the stack and insert system () address as return address. Hence the program will return to libc. We need to pass /bin/sh as parameter to system and hence resulting in spawning a shell. Smashed Stack layout: The objective is to return to system () proc in libc and call the ...

Click here to read more arrow

Parts Of A Fiber Optic Connector

02 Nov 2017

8 (8 )

A fiber optical connector terminates the end of an optical fiber, & enables quicker connections and disconnection than splicing. The connectors mechanically couple & align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. [1] Application Optical fiber connectors are used to ...

Click here to read more arrow

Over View Of Cement Plant

02 Nov 2017

1 (1 )

Chapter 6 Now a day’s cement has emerged as one of the important requirements in the field of construction. Cement is manufactured after undergoing several operations and get processed by various equipment such as Raw Mill , Kiln , Coal Mill and Cement Mill. The process of Cement manufacturing is further grouped ...

Click here to read more arrow

Mining And Research Hub At L5

02 Nov 2017

1 (1 )

Navdeep Sharma*, Aman Mahajan Department of Physics, Guru Nanak Dev University, Amritsar-143005, Punjab, India. Abstract *Corresponding author: [email protected]; contact number: +919814210126; Address: Department of Physics, Guru Nanak Dev University, Amritsar-143005, Punjab, India. Second author: [email protected]; Address: Department of Physics, Guru Nanak Dev University, Amritsar-143005, Punjab, India. In this paper the design of an orbital ...

Click here to read more arrow

The Nuclear Leaking In Japan

02 Nov 2017

6 (6 )

logo%2520MMU FACULTY OF ENGINEERING AND TECHNOLOGY (FET) EHM 3066 ENGINEER AND SOCIETY TRIMESTER 3 SESSION 2012/2013 Group Members: No. Name Student ID Lecture Section 1 Teng Yu Yang 1102701289 EM 209 2 Lim You Wei 1102702424 EM 209 3 Tan Wei Sheng 1102702039 EM 209 4 Chai Cheong Lun 1102702313 EM 209 5 Yap Kok ...

Click here to read more arrow

Homer Micropowers System Modelling

02 Nov 2017

6 (6 )

The objective of this thesis is to assess the feasibility of different Hybrid-renewable systems configurations, which can be modeled on houses in different regions of the country. The systems are assessed in terms economical and technical aspects . The different system models were designed and simulated with HOMER energy software ,the version ...

Click here to read more arrow

Screen And Stencil Printability

02 Nov 2017

4 (4 )

CHAPTER 1 Solders are generally described as fusible alloys with liquids temperature below 400°C (750°F). Solder is a filler metal with a low melting point. In welding and metallurgical processes, solder is used to join two or more metallic surfaces. This means that, using metals that have a low melting temperature to adhere the surfaces ...

Click here to read more arrow

The Electricity Sector In Germany

02 Nov 2017

5 (5 )

2.1 INTRODUCTION OF THE ELECTRICITY SECTOR IN GERMANY In the year 2009 the electricity sector produced 61 % fossil fuel power, produced 23 % nuclear power and 18 % renewable energy whereas we can see that wind, solar, hydro, geothermal power is totally negligible in Germany. Germany has mainly planned a policy of phasing out ...

Click here to read more arrow

Large Structure With Facilities To Drill Wells

02 Nov 2017

9 (9 )

PART A 1. Overview An oil platform, often referred to as an offshore platform or, somewhat incorrectly, oil rig, is a large structure with facilities to drill wells, to extract and process oil and natural gas, and to temporarily store product until it can be brought to shore for refining and marketing. In many cases, the ...

Click here to read more arrow

Gratings Fbgs And Long Period Gratings

02 Nov 2017

1 (1 )

[Type the document title] muhammad iftikhar BEng Electrical and Electronic Engineering School of Engineering and Applied Science Aston University Supervisor: Professor Lin Zhang April 2013 ACKNOWLEDGEMENT SYNOPSIS The aim of the project was to research and investigate a bio/chemical optical sensing platform using Fibre Bragg Gratings (FBGs) and Long Period Gratings. The project involved the design ...

Click here to read more arrow

Information Technology And Quantitative Management

02 Nov 2017

1 (1 )

Modeling Maintenance Effect with failure-counting Yu Zhoua, Gang Koua [1] , and Daji Ergub aSchool of Management and Economics, University of Electronic Science and Technology of China, Chengdu, China bSouthwest University for Nationalities, Chengdu, China Abstract The assessment and modeling of the maintenance effect is an active research topic. In this paper, we proposed a failure-counting-based maintenance ...

Click here to read more arrow

Case Study On Manufacturing And Repair

02 Nov 2017

5 (5 )

Term Project submitted in partial fulfillment of the requirements for the module MT5612 – COMPUTER AIDED PRODUCT DEVELOPMENT SEMESTER-2 2012 Approved by (Assoc. Prof. Lu Wen Feng) Date ABSTRACT: A turbine blade is one of the main components which make up the turbine engine. A Turbine blade design and manufacturing is a complicated process, as the machining is to ...

Click here to read more arrow

The Importance Of Wind Turbines Why Are They Needed

02 Nov 2017

7 (7 )

With worldwide energy demands constantly on the rise, the need for sustainable green energy sources is becoming ever more important. Global population growth and emerging developing nations paired with an exhaustible supply and constant increase in price of the world’s fossil fuels is causing an increased interest into alternative energy sources. Based on current consumption ...

Click here to read more arrow

Comparison Of Nuclear Power In Different Countries

02 Nov 2017

6 (6 )

Nuclear power is produced with the use of nuclear reactions and it uses nuclear fission to produce electricity. Many nations use nuclear power plants for electricity and it provides 14% of worlds electricity and there are 440 Commercial Nuclear reactors over 30 countries with 376,000 MGW. And the first Nuclear power station is Obninsk ...

Click here to read more arrow

The Solar Cell Structure

02 Nov 2017

1 (1 )

MSc Innovative Technology Engineering Module Green Technology Submitted by Eugene Byrne 01133116 Date 18/4/2013 Contents Table of Figures Introduction Renewable energy has gone mainstream, accounting for the majority of capacity additions in power generation today (Fab, 2012). Wind, hydropower and solar photovoltaic ...

Click here to read more arrow

Helical Gear Reliability Prediction

02 Nov 2017

2 (2 )

A gear is a wheel-like rotating machine component with a number of cut teeth that meshes with another toothed part in order to transmit torque. Two or more gears working in tandem are called a transmission and can produce a mechanical advantage through a gear ratio, see Figure 6.. Geared devices can be used to change the speed, torque, and/or direction of a power from a source. ...

Click here to read more arrow

Automakers And Other Oems

02 Nov 2017

7 (7 )

Traditional applications for eddy-current inspection involve a technician using a hand-held instrument to look for microscopic cracks in heat exchanger tubing, turbine blades, aircraft skins, and fasteners. But, the current emphasis by automakers and other OEMs on zero defects is forcing suppliers of fasteners and other small parts to rely on 100% inspection to assure ...

Click here to read more arrow

The Constitutive Materials The Capacitors

02 Nov 2017

6 (6 )

20.2.2 Capacitors Introduction There are few electronic components which – carrying out the same function – can differ so much from the constitutive materials point of view as the capacitor. Concerning the constitutive materials, the capacitors are built from two electrodes isolated with a dielectric medium, serving to store an electrical charge. The prime objective ...

Click here to read more arrow

The Reactor And Radioactive Particles

02 Nov 2017

1 (1 )

Email Contact: [email protected] Group Members: No. Name Student ID Lecture Section 1 Pang Chih Jian 1102702667 EM 208 2 Leang Wei Shyang 1102701417 EM 208 3 Loo Ching Beng 1102701375 EM 208 4 Chan Yong Qian 1121117697 EM 208 5 Liyana Bt. Idrus 1121117424 EM 209 Marking Scheme: Assignment 2 Report Max Marks Comments Ethical ...

Click here to read more arrow

Figure Lightning Protection Zones

02 Nov 2017

8 (8 )

1 Introduction The UK government has introduced a new initiative aimed at encouraging the nationwide adoption of renewable energy technologies. Named the Feed –in Tariff, this initiative will see owners of renewable energy equipment being paid not only for energy use but also the amount of surplus energy they supply to the UK National Grid. ...

Click here to read more arrow

Challenges And Solution For Next Generation Machine

02 Nov 2017

8 (8 )

Abstract-Electric machines are being developed day by day. This report presents the idea about next generation machine and challenges to develop such type machine and how to overcome those challenges. Rotor and stator designs affecting efficiency of a machine are discussed. Increased torque density and reduced vibration and noise of a machine are vital characters for ...

Click here to read more arrow

Sustainability In Hospitality Industry

02 Nov 2017

8 (8 )

Name: Chong Ming Xiang Class: Rebel 14 Email: [email protected] Contact No: 96320981 Instructor: A. Prof. Dr. Madeleine Cheah Hevera Our Travel, Our Health Executive Summary Noise pollution, traditionally defined as "unwanted or disturbing sound" is excessive and displeasing human, animal, or machine created environmental noise that disrupts the activity of human or animal life ...

Click here to read more arrow

Catalytic Combustion Of Methanol

02 Nov 2017

1 (1 )

Proceedings of the ASME 2013 International Mechanical Engineering Congress & Exposition IMECE2013 November 13-21, 2013, San Diego, California, USA IMECE2013-62776 DRAFT: ON-CHIP POWER GENERATION: MICROFLUIDIC-BASED REACTOR FOR CATALYTIC COMBUSTION OF METHANOL Sheng Tian ...

Click here to read more arrow

Dispatch And Control Strategies

02 Nov 2017

9 (9 )

1.Deptt.of Eelctrical Engg., A.D Patel Institute of Technology and Science, Gujarat, India 2.Deptt.of Electrical Engg., BVM Engineering College, Gujarat, India Abstract: Economic, technology and environmental incentives are changing the scenario of electricity generation and transmission. Centralized generating facilities are giving way to smaller, more distributed generation partially due to the loss of traditional ...

Click here to read more arrow

A Flight Case Study Eurofighter Typhoon

02 Nov 2017

4 (4 )

Aerodynamic Principles By Steven McCluskey 22009279 Fig1. Eurofighter Typhoon Flying This is a research report of the Eurofighter Typhoon, the report will look at the history of this type of aircraft as well as a number of technical features of the plane. Contents Introduction………………………………………………………………3 Wing Features…….……………………….……………………………...4 Fuselage Features………………………………………………………5-6 Propulsion System………………………………………………………..7 Introduction The Eurofighter Typhoon is ...

Click here to read more arrow

The Hydrogen Gasoline Engine

02 Nov 2017

4 (4 )

Introduction: Hydrogen gas inventor, generally it can be explain by the inventor electrolyze the water compounds into hydrogen gas and oxygen gas. The hydrogen gas is pump into the gasoline engine for better combustion to get better output energy. Basically the hydrogen gas are more flammable that oxygen gas. Diagram 1: Hydrogen Gasoline Engine The ...

Click here to read more arrow

Investigation And Optimization Of Process Parameters

02 Nov 2017

9 (9 )

Parveen Kr. Saini*, Sanjeev Kr. Garg Assistant professor, Mechanical Engineering Department, JMIT College, Radaur-135133, Yamuna Nagar, Haryana, India. *Corresponding author E-mail: [email protected], [email protected] Fax-+91-1732-283800, Contact No. +91-8295996633. ABSTRACT This paper aims to investigate the experimental results of the machining characteristics and the effect of process parameters during ultrasonic machining of titanium alloy (Ti-6Al-4V) through cryogenic ...

Click here to read more arrow

An Adaptive Algorithm Developed By Widrow

02 Nov 2017

7 (7 )

A quick and simple graphical method can be used to design a filter and validate the design using MATLAB the design can then be scaled up to higher order structures, and then implemented in real-time. An adaptive algorithm developed by Widrow known as the LMS algorithm can control a filter coefficients to a dynamic environment. ...

Click here to read more arrow

Performance Analysis For The Design

02 Nov 2017

6 (6 )

ANJU. M1 R. RAJASEKARAN2 1 PG Scholar, Department of EEE, SNS College of Technology, Coimbatore. 2 Asst. Professor, Department of EEE, SNS College of Technology, Coimbatore. 1 [email protected] ...

Click here to read more arrow

Introduction To Composite Material

02 Nov 2017

3 (3 )

Composites are used by us almost every day; if we take a look around they are almost everywhere and have been around since the beginning of the human civilization when people used to make bricks from mud reinforced with straw. Some present day examples for use of composite materials are tennis racket, golf clubs, cars ...

Click here to read more arrow

Global Medical Device Regulations Update

02 Nov 2017

1 (1 )

1Pharmaceutical Quality Assurance Group, 1Department of Pharmaceutics. JSS College of Pharmacy, JSS University. Shri Shivarathreeshwara Nagar, Mysore - 570015, Karnataka, India. *Corresponding Author: Name: Dr. N. Vishal Gupta Email: [email protected] Contact: 9242157508. Fax: Date of Submission: Abstract: This Article reviews the latest updates of Medical Device regulations in different regulatory and non-regulatory bodies across the ...

Click here to read more arrow

The Importances Of Wind Turbines

02 Nov 2017

4 (4 )

With worldwide energy demands constantly on the rise, the need for sustainable green energy sources is becoming ever more important. Global population growth and emerging developing nations paired with an exhaustible supply and constant increase in price of the world’s fossil fuels is causing an increased interest into alternative energy sources. Based on current consumption ...

Click here to read more arrow

Office Building Energy Savings

02 Nov 2017

1 (1 )

CHAPTER 1 Office building energy saving is one of the ways to reduce loss of energy in building in Malaysia. To improve the energy efficiency of buildings needs to rational use of energy and improves energy efficiency in ensuring the conditions of building comfort. Building energy-saving specifically refers to that In the building planning, design ...

Click here to read more arrow

Ash Reducing Measures During Combustion Of Ash Rich Fuels

02 Nov 2017

6 (6 )

Abstract In this paper we say about the ash reducing techniques carried out with the experiments for the solid fuel (coal), liquid fuel (petroleum) and gaseous fuel(). Also we discuss about the consequences of the inorganic compounds in the fuel. Introduction The revolution of civil society brings invention of electricity. Nowadays electricity plays an important ...

Click here to read more arrow

Blended Portland Cements And Bottom Ash

02 Nov 2017

2 (2 )

CHAPTER 2 Cement is a substance which has adhesive and cohesive properties with the ability of bonding mineral fragments into a compact whole. For construction purposes, the cements of interest in making of concrete have the ability of setting and hardening under water by virtue of a chemical reaction with it. (Properties of Concrete) The ...

Click here to read more arrow

An Introduction To The Optical Tweezer

02 Nov 2017

8 (8 )

History Arthur Ashkin invented optical trapping, or the process by which atoms are trapped by laser light, at Bell Labs [1]. He found that radiation pressure -- the ability of light to exert pressure to move small objects -- could be harnessed to constrain atoms [2]. By his work, he demonstrated that optical forces could levitate ...

Click here to read more arrow

Study Of Seismic Performance And Retrofitting

02 Nov 2017

8 (8 )

SHAIK KABEER AHMED Assistant Professor, Department of Civil Engineering NMAM Institute of Technology, Nitte, INDIA Email: [email protected] Abstract—In current scenario very little knowledge about seismic evaluation of structures are available in the way of guidelines for use in the existing concrete buildings. An improved Pushover analysis using ETABS based on structural dynamic theory, ATC-40 and ...

Click here to read more arrow

Situation Definition Problem Definition Search For Solution

02 Nov 2017

6 (6 )

Contents page Preface Introduction Situation definition Problem definition Search for solution Analysis performance Evaluation of alternatives Choice of project Specification and construction 10.0 Conclusion Preface Our group was given an assignment on transportation planning whereby a particular area surrounded by residential areas, shop houses and school. Our group consist of 2 members including myself as the ...

Click here to read more arrow

Fossil Fuels Are A Finite

02 Nov 2017

2 (2 )

Strayer University Online SCI 110 Professor Eugene DeSilva Energy conversion is the conversion of one type of energy into another. This principle is used every day in our lives. For instance, a battery uses chemical energy to create electrical energy to power an electric starter motor. Steam engines change heat energy into ...

Click here to read more arrow

The Wartsila 26 Medium Engines

02 Nov 2017

2 (2 )

http://gcaptain.com/wp-content/uploads/2012/11/wartsila-26.jpg Figure : THE WARTSILA 26 MEDIUM ENGINE Source: (gCaptain - Maritime & Offshore News 2012) In the past, serious accidents had occurred as a result of lack of understanding the operation of the compressed air equipment’s which led to loss of life, property and pollution of the environment, especially the explosion on the m.v. ...

Click here to read more arrow

Microcontroller Pin Configuration Is Shown

02 Nov 2017

8 (8 )

Abstract This repot is about pic16f84a microcontroller programming that how we write a program and how to burn it. In this report there is little introduction about controller and most of code are described. This report is on subject digital electronics designs. There are different tasks which we have to complete by writing their coding ...

Click here to read more arrow

Research Paper On Hybrid Cars In The Us

02 Nov 2017

9 (9 )

The cars we use all over the world are detrimental to our Earth�s environment. In the United States, air quality often fails to meet federal standards. Air pollution, water pollution, global warming, and ozone depletion are some of the problems we face each day that reflect the consequences of our actions. The cars we drive emit ...

Click here to read more arrow

Government Of Tamil Nadu

02 Nov 2017

9 (9 )

Abstract The aim of the thesis is to study about the frequent power shortages its causes, wind power potential , policy and efforts put by Government of Tamil Nadu in support of Wind power development. To idendify the potential Wind sites for new projects and repowering of outdated wind turbine generator in Tamil Nadu Introduction ...

Click here to read more arrow

Annual Demand Of Bunker Fuel

02 Nov 2017

2 (2 )

(University of Petroleum and Energy Studies) ACKNOWLEDGEMENT This is to acknowledge with sincere thanks for the assistance, guidance and support that I have received during the dissertation. I place on record my deep sense of gratitude to the Oil & Gas department for giving me immense support to pursue my final year dissertation. My deepest ...

Click here to read more arrow

Design And Performance Analysis

02 Nov 2017

8 (8 )

R. Rajasekaran1 K. Senthilkumar2 1 Asst. Professor, Department of EEE, SNS College of Technology, Coimbatore. 2 Associate Professor, Department of ME, SNS College of Technology, Coimbatore. 1 [email protected] [email protected] 22222 2 Abstract – A machine design of a switched reluctance motor ...

Click here to read more arrow

Centrifugal Acceleration Affect On Gravitational Force

02 Nov 2017

7 (7 )

Ans1 Gravity of earth which is denoted by 'g' is the acceleration that is imparted by earth on or near its surface to objects. The value of this acceleration is approximately 9.81 m/s*s. Gravitational force is that force which is mainly responsible for the life on earth and due to this force only we can stand ...

Click here to read more arrow

New European Drive Cycle Nedc

02 Nov 2017

9 (9 )

Abstract-This paper will describe many kinds of electric motors which used with electric vehicles in past. A new design technique for the electric vehicle (EV) motors have been described in this paper in order to provide a motor with high efficiency and suitable to work with the New European Drive Cycle (NEDC) by satisfying ...

Click here to read more arrow

Thermal Management Of Microelectronic Packages

02 Nov 2017

1 (1 )

MEE-580 Research Project By Muhammad Omar Memon University of Dayton April 2013 Introduction Thermal management is an important design consideration for number of microelectronic components and packages. Few essential ways of thermal management of microelectronic packages are efficient cooling techniques, efficient thermal interfaces and heat dissipaters. Due to the current trend of increasing heat fluxes ...

Click here to read more arrow

Photovoltaic Cells Solar Cells

02 Nov 2017

3 (3 )

The photovoltaic cell (PV cell) offers a limitless and environmentally friendly source of electricity. Also called a solar cell, the photovoltaic cell is able to create electricity directly from photons. A photon can be thought of as a packet of light and the energy of a photon is proportional to the wavelength of light. Photovoltaic ...

Click here to read more arrow

Prognosis Of Steerable Thruster Reliability

02 Nov 2017

3 (3 )

Course: Master of Engineering in Maintenance and Asset Management HU principle supervisor: Cyp van Rijn HU secondary supervisor: Tim Zaal Company supervisor: Luc Looijen Student: Frank Velthuis Cohort: 12 E-mail: [email protected] Telephone: +31 (0)6 53133394 Date: xx-xx-xx Revision: 000 Summary Acknowledgements Secrecy All information, data and reporting of this thesis is considered confidential. All members of the graduation committee must adhere to this confidentiality. Wärtsilä ...

Click here to read more arrow

Internal Multiband Mobile Phone Antenna

02 Nov 2017

8 (8 )

Kumari Pammi, IEEE Member, M. Tech 2nd Year(RTU,Kota), Digital Communication. Email [email protected] Department,RTU,Kota). Email Id-kumaripamm[email protected] Abstract We formed a new internal multiband mobile phone antenna by cutting two printed monopole slots of different lengths at the edge of the system ground plane of the mobile phone.It will generate two wide bands centered at about 900 ...

Click here to read more arrow

The Lms Widrow Algorithm

02 Nov 2017

6 (6 )

This is an abstract of the notch this is an abstract of a digital filter this is an abstract of a digital filter is an abstract of the notch this is an abstract of a digital filter this is an abstract of a digital filter Introduction This report will cover the design of an IIR ...

Click here to read more arrow

Statement Of Proposal The Problem Statement

02 Nov 2017

6 (6 )

http://2.bp.blogspot.com/_nlfWaL2RyK8/SdMv9C7gCEI/AAAAAAAAAAM/q188t7ZWoQk/S220/UPES-Logo+RGB%5B1%5D.JPG SYNOPSIS DISSERTATION – 2 SEM-8 TO STUDY THE GLOBAL MARKET SCENARIO AND ANALYZE THE NEW APPLICATIONS OF INDUSTRIAL GASES COMPLETED UNDER THE MENTORSHIP OF PROF. S. K. POKHRIYAL COMES, UPES SUBMITTED BY AMAN SUD R-430209005 INTEGRATED BBA + MBA SEM 8 UPES STATEMENT OF PROPOSAL THE PROBLEM STATEMENT: TO STUDY THE GLOBAL INDUSTRIAL GAS ...

Click here to read more arrow

Pre Commissioning Of Power Transformer

02 Nov 2017

7 (7 )

Mohd Harith Bin Ahmad Faculty of Electrical Engineering Universiti Teknologi MARA Malaysia 40450 Shah Alam, Selangor, Malaysia E-mail: [email protected] Abstract- After new power transformer has been set up on site and before it connects with power supply and loading the load, it is must to have to go through numbers of testing procedures for confirming ...

Click here to read more arrow

Radiation Quantities And Units Exposure

02 Nov 2017

5 (5 )

The quantity which is most common used to express the radiation at a specific point is known as exposure. The SI unit used to calculate exposure is coulomb per kilogram of air i.e. (C/kg) and conventional unit us roentgen (R). Their relationship can be written as 1R = 2.58 * 10^-4 per kg of air ...

Click here to read more arrow

Producing Electricitys From Light Is Photovoltaic

02 Nov 2017

4 (4 )

Producing electricity from light is Photovoltaic. This phenomenon is deployed in converting abundantly available solar light energy to direct current (DC) electricity. The basic device acting as a transducer for the light energy into electrical energy is the solar cell which primarily is a semiconductor that exhibits photovoltaic property. When these semiconductors, which basically are ...

Click here to read more arrow

Independent Power Producer Ipp

02 Nov 2017

6 (6 )

A National Grid system is an interconnected network of a country where there are delivering of electricity from a producer (public or private firm) to consumers. This may result by a system thereby the connexion and supplier can be on High-voltage or Low-voltage network. Independent Power Producer (IPP) An Independent Power Producer is not a public electric service. They ...

Click here to read more arrow

7 Fragility Functions Of Gas And Oil Networks

02 Nov 2017

6 (6 )

P. Gehl1, N. Desramaut1, A. Réveillère1,2, H. Modaressi1,3 1 : BRGM, 3 avenue Claude-Guillemin BP 36009, 45060 Orléans Cedex 2, France 2 : Now at Geostock, 2 rue des Martinets CS 70030, 92569 Rueil-Malmaison Cedex, France 3 : Now at Saunier & Associés, 205 avenue Georges Clemenceau, 92024 Nanterre Cedex, France Abstract   sdfsfsdfsdfsdf 7.1 Introduction sfsdfs 7.2 Identification ...

Click here to read more arrow

Supply Chain And Logistics Management Practices

02 Nov 2017

6 (6 )

Final Report Supply Chain and Logistics Management Practices Of Intel Co. By Sandip Bhandari Ivo Kolev Intel Corporation business encompasses manufacturing technology and operations. Intel factories turn raw silicon wafers into complex and advanced integrated circuits. The manufacturing process produces integrated circuits that are delivered to customers as finished goods or subsequently used in the ...

Click here to read more arrow

An Examination Of The Performance Of Thyssenkrupp

02 Nov 2017

4 (4 )

In the world today, many organizations maximize their shareholder value to attract many investors to invest on the corporations. But, corporations sometimes forget about the important roles which they play on social environment when achieving their target. Corporations can affect into some impacts to the sociality life, furthermore market power and corporate social responsibility (CSR). Corporation’s ...

Click here to read more arrow

Pre Design Of An Integrated Aerator Mixer

02 Nov 2017

7 (7 )

Pablo Tagle Instituto Tecnológico y de Estudios Superiores de Monterrey Ave. Eugenio Garza Sada 2501 Sur, Col. Tecnológico C.P. 64849 Monterrey, N.L., México e-mail: [email protected] Abstract In the operation performed in an aerobic reactor, one of the problems is the energy consumption due to compression of air to oxygenate the water and the mixer for ...

Click here to read more arrow

Computer Networks Fiber Optic Connector Types

02 Nov 2017

1 (1 )

Submitted to Sri Lanka Institute of Information Technology EN11507048 W.P.M.I Boteju In partial fulfillment of the requirements for the Diploma in Electronic Engineering February 2013 Declaration I certify that this report does not incorporate without acknowledgement, any material previously submitted for a degree or diploma in any university, & to the best of my knowledge ...

Click here to read more arrow

The Wartsila 26 Mediums Engine

02 Nov 2017

2 (2 )

http://gcaptain.com/wp-content/uploads/2012/11/wartsila-26.jpg Figure : THE WARTSILA 26 MEDIUM ENGINE Source: (gCaptain - Maritime & Offshore News 2012) In the past, serious accidents had occurred as a result of lack of understanding the operation of the compressed air equipment’s which led to loss of life, property and pollution of the environment, especially the explosion on the m.v. ...

Click here to read more arrow

A Variable Speed Drive

02 Nov 2017

2 (2 )

Introduction 1.1 Variable Speed Drive: Rotational industrial loads require operation at any one of a wide range of operating speeds. Such loads are generally termed as variable speed drives or adjustable speed drives. The variable speed drive systems are also an integral part of automation. They help to optimize the process and to reduce investment ...

Click here to read more arrow

Importance Of Turbine Engines Overhauls And Repair

02 Nov 2017

4 (4 )

Vidal Sanchez Mr. Kahanek PP1.702 Importance of turbine engines overhaul and repair Engine overhaul is the process of maintaining and restoring the engine and its components to serviceable conditions. An engine overhaul consists of disassembly, inspection, reassembly and testing prior to return to service. Turbine engines have to be overhauled after certain period of servicing. ...

Click here to read more arrow

Contents Corrosion Prevention Introduction

02 Nov 2017

4 (4 )

Introduction This report is about corrosion prevention in automotive vehicles, the report first start with defining the corrosion and its basic reaction, it then looks at basic reaction of unprotected body shell of car., it will then further discuss method of preventing corrosion in cars emphasising more on the coating system. Also the report will ...

Click here to read more arrow

Input And Output Devices

02 Nov 2017

1 (1 )

Contents Unitary PLC 4 Modular PLC 6 Rack-mounted PLC 8 CPU 9 Input and Output Devices 11 Inputs 11 Inductive proximity sensor 12 Photo Electric Sensor 14 Optical Reflective Sensor 15 Outputs 16 Indicators 16 Indicator light 16 Indicator buzzer 16 Solenoid valve 18 Bus Network 20 LAN- Local Area Network 20 21 Ladder logic 22 Ladder logic symbols 24 Structured text 28 Overview Before PLC’s were created many industries such as ...

Click here to read more arrow

Introduction Of Crude Oil Industry

02 Nov 2017

8 (8 )

A mixture of hydrocarbons that exists in fluid stage in regular underground stores and remains fluid at barometrical force in the wake of passing through surface splitting offices. Relying on the qualities of the unrefined stream, it might likewise incorporate 1. Modest measures of hydrocarbons that exist in vaporous stage in common underground repositories however ...

Click here to read more arrow

Machining Operations Are Widely Used

02 Nov 2017

2 (2 )

Abstract Machining operations are widely used to produce industrial parts with different shapes and complicated profiles. As a machining operation, broaching is commonly used for the machining of a broad range of complex internal and external profiles either circular or non-circular such as holes, keyways, guide ways, and fir-tree slots on turbine discs. Broaching is ...

Click here to read more arrow

Indian Aviation An Insight

02 Nov 2017

1 (1 )

Report submission for Indian Economy SAMAY S SABHARWAL This is an insight into the Indian Aviation sector. It gives the details of the market structure, the entry requirments, routes and slots allocation, airports, pricing, taxation, and FDI. Executive Summary This report identified a number of rules and regulations which according to our evaluation parameters ...

Click here to read more arrow

Design A Bidirectional Solar Tracking System

02 Nov 2017

1 (1 )

The final year project is to design a Bidirectional Solar Tracking System. This idea is come to get the maximum sun radiation by tracked the sun using microcontroller with motor drive control. It is using light alumuniums, mirrors, power window motor, dc motor, and PV panels. Nevertheless, it have to program the microcontroller PIC to ...

Click here to read more arrow

Piezoelectric Stack Actuated Nanopositioners

02 Nov 2017

9 (9 )

INTRODUCTION Piezoelectric stack actuated nanopositioners are widely used in the design of the Scanning Probe Microscope (SPM). This successful application of Nanotechnology is characterised by a lightly damped resonance mode which limits the accuracy of the scanners’ performance. Other problems which considerably limit the performance of the system are hysteresis; creeps; cross coupling; thermal drift ...

Click here to read more arrow

Producing Electricity With Differents Technologies

02 Nov 2017

2 (2 )

Today, we are producing electricity with different technologies, classic and renewable energies. However, a great part of it is still done using fossil fuels that cause terrestrial emission of carbon dioxide which, as all people know, produces earth overheating by the greenhouse effect. The greenhouse effect is a process that results in an elevation of ...

Click here to read more arrow

The Replacement Of Metallic Component

02 Nov 2017

5 (5 )

In recent years, the composite industries have begun to recognize that their business opportunities offer to various commercial applications is much larger than they have ever thought of. The introduction of newer polymer resin matrix materials and other high performance reinforcement fibres has shown a steady increased in usage and volume. A summary of genealogy ...

Click here to read more arrow

A Study On Energy Plus Houses

02 Nov 2017

1 (1 )

By Jonas Pakalnis This report is submitted in part fulfilment of the requirement for the award of Bachelor of Engineering (Honours) in Mechanical Engineering Institute of Technology Sligo June 2012 Abstract In this thesis the energy plus houses technologies and wind turbines were researched. Acknowledgement ...

Click here to read more arrow

Deregulated Electricity Market In The United Kingdom

02 Nov 2017

1 (1 )

1. Select a deregulated electricity market of your choice and write a short summary of it’s principal features. In your description, try and cover the following items. A. Compare and contrast how it operates in comparison to the deregulated electricity market in the United Kingdom. Consider aspects of trading and of certificates and the role of ...

Click here to read more arrow

Braggs Law And Why It Is Important

02 Nov 2017

5 (5 )

Bragg's Law refers to the simple equation: nλ = 2d sinΘ derived by the English physicists Sir W.H. Bragg and his son Sir W.L. Bragg in 1913 to explain why the cleavage faces of crystals appear to reflect X-ray beams at certain angles of incidence (Θ, λ). The variable d is the distance between atomic layers ...

Click here to read more arrow

Reduction Of Harmonics Constant Dc Link

02 Nov 2017

2 (2 )

In the electric power system, use of AC circuits has been a common practice nearly since the very inception of the interconnected power network. On such a system, the most familiar loads were constant power, constant impedance and constant current loads or a linear combination thereof. In these cases, the voltage and current ...

Click here to read more arrow

Design Fabrications And Measurement Of Biomimetic Flow Sensor

02 Nov 2017

7 (7 )

Mohd Norzaidi Mat Nawi1*, Asrulnizam Abd Manaf1,2, Mohd Rizal Arshad1, Othman Sidek2. 1Underwater Robotics Research Group (URRG), School of Electrical and Electronic Engineering 2Collaborative microelectronic Design Excellence Center (CEDEC), Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Pulau Pinang, Malaysia email*: [email protected] Abstract This paper reported the design, fabrication and measurement of biomimetic hair cell ...

Click here to read more arrow

Measurement And Prediction Of Turbulence In Floatation Cells

02 Nov 2017

2 (2 )

Introduction Up till now, understanding of flotation cell operation is insufficient and imperfect. Phenomena affecting operation of flotation cells are widely investigated, but panorama is still vacant. New sizes of flotation cells can be faultlessly built based on scale-up laws, some of which are quite clear in principle such as the criterion for the suspension ...

Click here to read more arrow

Increase In World Oil Prices

02 Nov 2017

1 (1 )

CHAPTER 1 INTRODUCTION GENERAL For recent years, the increase in world oil prices has risen dramatically and rising oil prices also have an impact on our country. Therefore, coal price in the world also increase. Gas and coal is one of the main fuel to generate electricity, if increase fuel price it also will affect ...

Click here to read more arrow
Get in Touch With us

Get in touch with our dedicated team to discuss about your requirements in detail. We are here to help you our best in any way. If you are unsure about what you exactly need, please complete the short enquiry form below and we will get back to you with quote as soon as possible.